|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
VS6750 2 Megapixel SMIA Camera Module DATA BRIEF Features 2 Megapixel resolution sensor (1600 x 1200) SMIA 1.0 profile 2 compliant Video data interface - CCP 2.0 Command interface - CCI 2.5 V/1.8 V operation On-board 10 bit ADC Small physical size Integral EMC shielding Ultra low power standby mode On-chip PLL On-chip POR Smooth frame rate control Automatic dark level calibration The VS6750 features allow straightforward integration into mobile phone designs: low EMI video interface and package/socket shielding, low wire count (8 total), embedded power management(30 W power-down) and embedded PLL. A minimal list of external components is required: supply decoupling capacitors, CCI pull-ups and a charge-pump capacitor. The VS6750 3-element lens design ensures high quality image capture while maintaining low module height.The overall optical stack, including lens system, IR filter and sensor optical structures is developed within ST. The VS6750 package uses the second generation of SmOP packaging technology. Sensor and lens are assembled in a fully automated test and focus process for high volume and low cost production. This 2 Megapixel sensor fits within the SMIA95 form factor (9.5 x 9.5 x 7.6 mm3). Description The VS6750 is a 2 Megapixel camera module targeted at mobile applications. The camera module is SMIA 1.0 profile 2 compliant and is capable of generating raw bayer UXGA images up to a maximum of 30 fps. The VS6750 supports the CCI control and CCP 2.0 data interfaces. As different phone platforms have varying image processing capabilities and interfaces, it is possible that the system host may not handle the processing tasks required if connecting the VS6750 directly, or that the resulting frame rate performance may be too low. In such cases, a separate hardware accelerator (STV0984) device can be incorporated in the system to provide higher performances and/or a wider choice of interfaces. VS6750 offers an ultra low power consumption standby mode consuming less than 30 W. Applications Mobile phone PDA Wireless security camera September 2005 CD00066604 Rev 1 1/3 www.st.com 3 For further information contact your local STMicroelectronics sales office. VS6750 Figure 1. VS6750 2 Megapixel SMIA Camera Module Application diagram EXTCLK STV0984 XSHUTDOWN 2 Megapixel SMIA Mobile CCI Imaging Processor (optional) CCP 2.0 Baseband or Application Processor Table 1. Technical specifications 1600 x 1200 (UXGA) 1608 x 1208 3.0 m x 3.0 m 0.18um HCMOS8is +120 dB +24 dB (max.) 60 dB (typical) 33 dB (typical) 2V4 - 2V9 (analog supply) 1V7 - 1V9 (digital supply) <235 mW (@30 frame/s) <30 W (standby mode) 50o HFOV, f# 3.2 70 cm -> infinity 16 pad SMIA95 <|2%| 50% Socket or Flex Module resolution Physical pixel array Pixel size Sensor technology Exposure control Analog gain Figure 2. Block diagram Dynamic range SNR at 50 cd.m2 Supply voltage VS6750 EXTCLK XSHUTDOWN PLL and Clock Management Power Mgmt Power-On Reset CCI Receiver Sensor Control Registers 1608 x 1208 Pixel array 1152 x 864 VDIG DGND VHIGH VANA AGND Power consumption Lens Depth of Field Package type SCL SDA CLKP CLKN DATAP DATAN CCP 2.0 Transmitter Readout SMIA Profile 2 Frame Formatter Y Decoder Column ADC X Decoder Line SRAM TV Distortion Relative illumination System attach Figure 3. Outline Drawing Table 2. Storage Functional Normal operating Optimal operating Test Temperature range -40 to +85C -30 to +70C -25 to +55 C +5 to +30C 23 2C Table 3. Order codes Description SmOP2 SMIA95 tape and reel Part Number VS6750S02F/T2 2/3 CD00066604 VS6750 Revision history Date 21-Sept-2005 Revision 1 Initial release. Changes Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners (c) 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com CD00066604 3/3 |
Price & Availability of VS6750 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |